u 1 m 2 a 3 1 4 e 5 1 6 0 7 0 8 m 9 d 10 d 11 12 configuration 2 size code capacitance tolerance ( 20%) rated capacitance (10f) rated voltage (25v) series name type 2 in case at 3 units, put 2 as size code. d 3 pb-free leadwire pb-free pet sleeve cd 4 to 8 dd d 3 code 2 4 to 8 ( 3 : p 0.3 ) d p d 3 1.0 0.4 4 1.5 0.45 5 2.0 0.45 6.3 2.5 0.45 8 2.5 0.45 1 configuration 1 (mm) l +1max. 15 min 4 min sleeve ( p.e.t. ) d d +0.5 max. p 0.5 aluminum electrolytic capacitors ma series 5mml, standard, for general purposes standard series with 5mm height. compliant to the rohs directive (2011/65/eu). radial lead type dimensions type numbering system (example : 25v 10 f) specifications category temperature range rated voltage range rated capacitance range rated capacitance tolerance leakage current tangent of loss angle (tan ) stability at low temperature endurance shelf life marking performance characteristics item 40 to +85? 4 to 50v 0.1 to 470 f 20% at 120hz, 20? after 2 minutes' application of rated voltage, leakage current is not more than 0.01cv or 3( a), whichever is greater. printed with white color letter on black sleeve. figures in ( ) are for mr series. measurement frequency : 120hz after storing the capacitors under no load at 85? for 1000 hours and then performing voltage treatment based on jis c 5101-4 clause 4.1 at 20?, they shall meet the specified values for the endurance characteristics listed above. rated voltage (v) tan (max.) 4 0.35 6.3 0.24 (0.30) 10 0.20 (0.24) 16 0.16 (0.20) 25 0.14 (0.18) 35 0.12 (0.16) 50 0.10 (0.13) ma mt long life mv mf z 25? / z+20? z 40? / z+20? rated voltage (v) impedance ratio zt / z20 (max.) 4 7 15 6.3 4 8 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 rated ripple current (marms) at 85? 120hz ( ) = 3 units and mr series. size 3 5 is available for capacitors marked. " "/ size 5 5 is available for capacitors marked. " " size 6.3 5 is available for capacitors marked. " " in such a case, will be put at 2nd and 3rd digit of type numbering system. r m measurement frequency : 120hz at 20? 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 0r1 r22 r33 r47 010 2r2 3r3 4r7 100 220 330 470 101 221 331 471 0.3 5 0.4 5 0.4 5 0.5 5 6.3 5 0.8 5 0.8 5 19 28 33 56 96 145 185 0g 4 0.3 5 0.4 5 0.5 5 0.5 5 6.3 5 0.8 5 0.8 5 15 28 (21) 37 45 70 (68) 110 (90) 170 0j 6.3 0.5 5 0.5 5 6.3 5 0.8 5 0.8 5 33 41 52 (43) 80 (76) 135 1a 10 0.3 5 0.4 5 0.5 5 6.3 5 6.3 5 0.8 5 10 23 (18) 37 49 (43) 58 92 (86) 1c 16 0. 3 5 0. 4 5 0. 5 5 6.3 5 6.3 5 0. 8 5 0. 8 5 10 16 (12) 27 42 52 70 (62) 110 1e 25 0.3 5 0.4 5 0.4 5 0.5 5 6.3 5 0.8 5 0.8 5 8.4 15 (10) 18 29 46 62 (52) 80 1v 35 4 5(3 5) 4 5(3 5) 4 5(3 5) 4 5(3 5) 4 5(3 5) 0.4 5 0.4 5 0.5 5 6.3 5 0.8 5 0.8 5 1.0 (1.0) 2.0 (2.0) 2.8 (2.8) 4.0 (4.0) 8.4 (8.0) 13 (10) 17 20 33 52 (48) 71 1h 50 rated ripple case size d l (mm) cap.( f) code v high te m p e r a t u re the specifications listed at right shall be met when the capacitors are restored to 20 ? after the rated voltage is applied for 2000 hours at 85 ?. capacitance change leakage current tan within 20% of the initial capacitance value (mr series & 3 product : within 25%) 200 % or less than the initial specified value less than or equal to the initial specified value low impedance please refer to page 20, 21, 22 about the formed or taped product spec. please refer to page 4 for the minimum order quantity. frequency coefficient of rated ripple current coefficient frequency 50 hz 120 hz 300 hz 1 khz 10 khz or more 0.70 1.00 1.17 1.36 1.50 ? please refer to page 20 about the end seal configuration. bi-polarized mp cat.8100c
|
